# Makefile.in generated by automake 1.11.1 from Makefile.am.
# doc/C/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



#
# Some common rules for building gnumeric docs.
# These will be changed as the documentation format changes
# but it is a start.
#
# Requires that the calling makefile define 'lang'

#
# No modifications of this Makefile should be necessary.
#
# To use this template:
#     1) Define: figdir, docname, lang, omffile, and entities in
#        your Makefile.am file for each document directory,
#        although figdir, omffile, and entities may be empty
#     2) Make sure the Makefile in (1) also includes 
#	 "include $(top_srcdir)/xmldocs.make" and
#	 "dist-hook: app-dist-hook".
#     3) Optionally define 'entities' to hold xml entities which
#        you would also like installed
#     4) Figures must go under $(figdir)/ and be in PNG format
#     5) You should only have one document per directory 
#     6) Note that the figure directory, $(figdir)/, should not have its
#        own Makefile since this Makefile installs those figures.
#
# example Makefile.am:
#   figdir = figures
#   docname = scrollkeeper-manual
#   lang = C
#   omffile=scrollkeeper-manual-C.omf
#   entities = fdl.xml
#   include $(top_srcdir)/xmldocs.make
#   dist-hook: app-dist-hook
#
# About this file:
#	This file was taken from scrollkeeper_example2, a package illustrating
#	how to install documentation and OMF files for use with ScrollKeeper 
#	0.3.x and 0.4.x.  For more information, see:
#		http://scrollkeeper.sourceforge.net/
#	Version: 0.1.2 (last updated: March 20, 2002)
#

# 
# No modifications of this Makefile should be necessary.
#
# This file contains the build instructions for installing OMF files.  It is
# generally called from the makefiles for particular formats of documentation.
#
# Note that you must configure your package with --localstatedir=/var
# so that the scrollkeeper-update command below will update the database
# in the standard scrollkeeper directory.
#
# If it is impossible to configure with --localstatedir=/var, then
# modify the definition of scrollkeeper_localstate_dir so that
# it points to the correct location. Note that you must still use 
# $(localstatedir) in this or when people build RPMs it will update
# the real database on their system instead of the one under RPM_BUILD_ROOT.
#
# Note: This make file is not incorporated into xmldocs.make because, in
#       general, there will be other documents install besides XML documents
#       and the makefiles for these formats should also include this file.
#
# About this file:
#	This file was derived from scrollkeeper_example2, a package
#	illustrating how to install documentation and OMF files for use with
#	ScrollKeeper 0.3.x and 0.4.x.  For more information, see:
#		http://scrollkeeper.sourceforge.net/	
# 	Version: 0.1.3 (last updated: March 20, 2002)
#


pkgdatadir = $(datadir)/gnumeric
pkgincludedir = $(includedir)/gnumeric
pkglibdir = $(libdir)/gnumeric
pkglibexecdir = $(libexecdir)/gnumeric
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i686-pc-linux-gnu
host_triplet = i686-pc-linux-gnu
DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(top_srcdir)/doc/gnumeric-doc.make $(top_srcdir)/omf.make \
	$(top_srcdir)/xmldocs.make ChangeLog
#am__append_1 = gnumeric.pdf
am__append_2 = ssconvert.1
am__append_3 = ssindex.1
am__append_4 = ssgrep.1
#am__append_5 = gnumeric.chm gnumeric.hhmap
#am__append_6 = gnumeric.pdf
subdir = doc/C
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/gnumeric-config.h \
	$(top_builddir)/gnumeric-features.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN   " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(manpagedir)" "$(DESTDIR)$(winhelpdir)"
DATA = $(manpage_DATA) $(noinst_DATA) $(winhelp_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
	distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = ${SHELL} /tmp/Gnumeric/gnumeric-1.10.8/missing --run aclocal-1.11
ACLOCAL_AMFLAGS = 
ALL_LINGUAS = 
AMTAR = ${SHELL} /tmp/Gnumeric/gnumeric-1.10.8/missing --run tar
AM_DEFAULT_VERBOSITY = 0
AR = ar
AUTOCONF = ${SHELL} /tmp/Gnumeric/gnumeric-1.10.8/missing --run autoconf
AUTOHEADER = ${SHELL} /tmp/Gnumeric/gnumeric-1.10.8/missing --run autoheader
AUTOMAKE = ${SHELL} /tmp/Gnumeric/gnumeric-1.10.8/missing --run automake-1.11
AWK = gawk
CATALOGS = 
CATOBJEXT = .gmo
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2 -Wall -Wmissing-prototypes  -Wsign-compare -Wpointer-arith -Wnested-externs -Wchar-subscripts -Wwrite-strings -Wdeclaration-after-statement -Wnested-externs -Wmissing-noreturn -Wmissing-prototypes -Wmissing-declarations -Wno-pointer-sign -Werror=format-security
COMPONENT_DIR = component
CPP = gcc -E
CPPFLAGS = 
CYGPATH_W = echo
DATADIRNAME = share
DBCONTEXT = 
DBLATEX = 
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DOLT_BASH = /bin/bash
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
FGREP = /bin/grep -F
GCONFTOOL = 
GCONF_SCHEMA_CONFIG_SOURCE = 
GCONF_SCHEMA_FILE_DIR = 
GDA_CFLAGS = 
GDA_LIBS = 
GDK_PIXBUF_CSOURCE = gdk-pixbuf-csource
GETTEXT_PACKAGE = gnumeric
GLIB_GENMARSHAL = glib-genmarshal
GMOFILES = 
GMSGFMT = /usr/bin/msgfmt
GNM_PY_CFLAGS = -I/usr/include/python2.5 -I/usr/include/pygtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  
GNM_PY_LDFLAGS = -L/usr/lib/python2.5/config -lpython2.5 -lgobject-2.0 -lglib-2.0  
GNM_PY_LIBADD = 
GNOMEDB_CFLAGS = 
GNOMEDB_LIBS = 
GNOME_CFLAGS = 
GNOME_LIBS = 
GNUMERIC_API_VER = 1.10
GNUMERIC_CFLAGS = -pthread -I/usr/local/include/libgoffice-0.8 -I/usr/local/include/libgsf-1 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/libglade-2.0 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0  
GNUMERIC_LIBS = -Wl,--export-dynamic -pthread -L/usr/local/lib -lgoffice-0.8 -lgsf-1 -lgthread-2.0 -lrt -lglade-2.0 -lxml2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0  
GNUMERIC_PLUGIN_LDFLAGS = -avoid-version
GOFFICE_API_VER = 0.8
GOFFICE_PLUGINS_DIR = /usr/local/lib/goffice/0.8.8/plugins
GOFFICE_VERSION = 0.8.8
GREP = /bin/grep
GTK_CFLAGS = -I/usr/include/libglade-2.0 -I/usr/include/gtk-2.0 -I/usr/include/libxml2 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  
GTK_LIBS = -lglade-2.0 -lxml2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0  
GUILE_INCS = 
GUILE_LIBS = 
HILDON_CFLAGS = 
HILDON_LIBS = 
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INSTOBJEXT = .mo
INTLLIBS = 
INTLTOOL_EXTRACT = /usr/bin/intltool-extract
INTLTOOL_MERGE = /usr/bin/intltool-merge
INTLTOOL_PERL = /usr/bin/perl
INTLTOOL_UPDATE = /usr/bin/intltool-update
LD = /usr/bin/ld
LDFLAGS = 
LEX = flex
LEXLIB = -lfl
LEX_OUTPUT_ROOT = lex.yy
LIBOBJS = 
LIBS =  -lm
LIBSPREADSHEET_CFLAGS = -I/usr/local/include/libgoffice-0.8 -I/usr/local/include/libgsf-1 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/libglade-2.0 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0  
LIBSPREADSHEET_LIBS = -L/usr/local/lib -lgoffice-0.8 -lgsf-1 -lglade-2.0 -lxml2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0  
LIBTOOL = $(top_builddir)/doltlibtool
LIPO = 
LN_S = ln -s
LTCOMPILE = $(top_builddir)/doltcompile $(COMPILE)
LTCXXCOMPILE = $(top_builddir)/doltcompile $(CXXCOMPILE)
LTLIBOBJS = 
MAINT = #
MAKEINFO = ${SHELL} /tmp/Gnumeric/gnumeric-1.10.8/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
MKINSTALLDIRS = ./mkinstalldirs
MSGFMT = /usr/bin/msgfmt
MSGFMT_OPTS = -c
MSGMERGE = /usr/bin/msgmerge
NM = /usr/bin/nm -B
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = gnumeric
PACKAGE_BUGREPORT = http://bugzilla.gnome.org/enter_bug.cgi?product=gnumeric
PACKAGE_NAME = gnumeric
PACKAGE_STRING = gnumeric 1.10.8
PACKAGE_TARNAME = gnumeric
PACKAGE_URL = 
PACKAGE_VERSION = 1.10.8
PARADOX_CFLAGS = 
PARADOX_LIBS = 
PATH_SEPARATOR = :
PERL = perl
PERL_CC = gcc
PERL_CCCDLFLAGS = -fPIC
PERL_CCOPTS =  -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm  -I/usr/lib/perl5/5.10.0/i386-linux-thread-multi/CORE 
PERL_LD = gcc
PERL_LDDLFLAGS = -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables -L/usr/local/lib
PERL_LDOPTS = -Wl,-E -Wl,-rpath,/usr/lib/perl5/5.10.0/i386-linux-thread-multi/CORE  -L/usr/local/lib  -L/usr/lib/perl5/5.10.0/i386-linux-thread-multi/CORE -lperl -lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
PKG_CONFIG = /usr/bin/pkg-config
PLUGIN_LIST = 
POFILES = 
POFILES_FULL = 
POSUB = po
PO_IN_DATADIR_FALSE = 
PO_IN_DATADIR_TRUE = 
PSICONV_CFLAGS = 
PSICONV_CONFIG = 
PSICONV_LIBS = 
PYGOBJECT_CFLAGS = -I/usr/include/pygtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  
PYGOBJECT_LIBS = -lgobject-2.0 -lglib-2.0  
PYTHON = python
RANLIB = ranlib
SED = /bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
USE_NLS = yes
VERSION = 1.10.8
VERSION_IFACE = 110
VERSION_INFO = 110:8:0
WARN_CFLAGS = -Wall -Wmissing-prototypes 
WINDRES = 
XGETTEXT = /usr/bin/xgettext
YACC = bison -y
YFLAGS = 
YYYYMMDD = 20100809
Z_CPPFLAGS = 
Z_LIBS = -lz
abs_builddir = /tmp/Gnumeric/gnumeric-1.10.8/doc/C
abs_srcdir = /tmp/Gnumeric/gnumeric-1.10.8/doc/C
abs_top_builddir = /tmp/Gnumeric/gnumeric-1.10.8
abs_top_srcdir = /tmp/Gnumeric/gnumeric-1.10.8
ac_ct_CC = gcc
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = i686-pc-linux-gnu
build_alias = 
build_cpu = i686
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share

# **********  Begin of section some packagers may need to modify  **********
# This variable (docdir) specifies where the documents should be installed.
# This default value should work for most packages.
docdir = $(datadir)/gnome/help/$(docname)/$(lang)
dvidir = ${docdir}
exec_prefix = ${prefix}
gnumeric_datadir = ${datadir}/gnumeric/${VERSION}
gnumeric_icondir = ${datadir}/pixmaps/gnumeric
gnumeric_libdir = ${libdir}/gnumeric/${VERSION}
gnumeric_localedir = ${prefix}/${DATADIRNAME}/locale
gnumeric_plugindir = ${gnumeric_libdir}/plugins
host = i686-pc-linux-gnu
host_alias = 
host_cpu = i686
host_os = linux-gnu
host_vendor = pc
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /tmp/Gnumeric/gnumeric-1.10.8/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
lt_ECHO = echo
mandir = ${datarootdir}/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target_alias = 
top_build_prefix = ../../
top_builddir = ../..
top_srcdir = ../..
SUBDIRS = figures
lang = C
locale = C
entities = about-authors.xml about-history.xml about-license.xml \
	analysis-complexNumbers.xml analysis-goalseek.xml \
	analysis-overview.xml analysis-scenarios.xml \
	analysis-simulation.xml analysis-solver.xml \
	analysis-statistical.xml appendix-glossary.xml \
	appendix-keybindings.xml bugs.xml compiling.xml \
	configuration-localization.xml configuration-overview.xml \
	configuration-plugins.xml configuration-preferences.xml \
	configuration-toolbars.xml data-commentNlink.xml \
	data-delete.xml data-entry-advanced.xml \
	data-entry-external.xml data-entry.xml data-format.xml \
	data-generate.xml data-insert.xml data-modify.xml \
	data-filter.xml data-move-copy.xml data-overview.xml \
	data-selections.xml data-types.xml documenting.xml \
	extending-functions.xml extending-overview.xml \
	extending-plugins.xml extending-python.xml files-formats.xml \
	files-email.xml files-opening.xml files-overview.xml \
	files-saving.xml files-ssconvert.xml files-textopen.xml \
	files-textsave.xml getting-involved.xml graphics-drawings.xml \
	graphics-images.xml graphics-overview.xml graphics-plots.xml \
	graphics-widgets.xml gui-menus.xml gui-mouse.xml \
	gui-other-elements.xml gui-overview.xml gui-toolbars.xml \
	installing.xml legal.xml manual-usage.xml morehelp.xml \
	printing.xml quick-start.xml welcome.xml workbooks.xml \
	worksheets.xml functions.xml
#	functions.xml	# added in gnumeric-doc.make
figdir = figures
docname = gnumeric
omffile = gnumeric-$(lang).omf
gnumeric_docdir = $(top_srcdir)/doc
functions_xml_parts = func.defs func-header.xml func-footer.xml
MOSTLYCLEANFILES = functions.out functions.tmp

# **********  You should not have to edit below this line  **********
xml_files = $(entities) $(docname).xml

# Include generated files to simplify installation.
# (Entities, including functions.xml, are shipped via xmldocs.make.)

# Explicitly ship the manpages even if they are disabled
EXTRA_DIST = $(xml_files) $(omffile) $(functions_xml_parts) gnumeric.1 \
	ssconvert.1 ssindex.1 ssgrep.1 gnumeric-docbook-2-htmlhelp.xsl \
	gnumeric-C.omf $(am__append_6)
CLEANFILES = omf_timestamp
omf_dest_dir = $(datadir)/omf/gnumeric
scrollkeeper_localstate_dir = $(localstatedir)/scrollkeeper
noinst_DATA = $(am__append_1)
manpagedir = $(mandir)/man1
manpage_DATA = gnumeric.1 $(am__append_2) $(am__append_3) \
	$(am__append_4)
winhelp_DATA = $(am__append_5)
winhelpdir = $(gnumeric_datadir)/$(subdir)
all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/doc/gnumeric-doc.make $(top_srcdir)/xmldocs.make $(top_srcdir)/omf.make $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/C/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu doc/C/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-manpageDATA: $(manpage_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(manpagedir)" || $(MKDIR_P) "$(DESTDIR)$(manpagedir)"
	@list='$(manpage_DATA)'; test -n "$(manpagedir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(manpagedir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(manpagedir)" || exit $$?; \
	done

uninstall-manpageDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(manpage_DATA)'; test -n "$(manpagedir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(manpagedir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(manpagedir)" && rm -f $$files
install-winhelpDATA: $(winhelp_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(winhelpdir)" || $(MKDIR_P) "$(DESTDIR)$(winhelpdir)"
	@list='$(winhelp_DATA)'; test -n "$(winhelpdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(winhelpdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(winhelpdir)" || exit $$?; \
	done

uninstall-winhelpDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(winhelp_DATA)'; test -n "$(winhelpdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(winhelpdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(winhelpdir)" && rm -f $$files

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(manpagedir)" "$(DESTDIR)$(winhelpdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html-am:

info: info-recursive

info-am:

install-data-am: install-data-local install-manpageDATA \
	install-winhelpDATA
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-local uninstall-manpageDATA \
	uninstall-winhelpDATA

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
	install-am install-data-am install-strip tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am check check-am clean clean-generic clean-libtool \
	clean-local ctags ctags-recursive dist-hook distclean \
	distclean-generic distclean-libtool distclean-tags distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-data-hook \
	install-data-local install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-manpageDATA install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	install-winhelpDATA installcheck installcheck-am installdirs \
	installdirs-am maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
	ps ps-am tags tags-recursive uninstall uninstall-am \
	uninstall-local uninstall-manpageDATA uninstall-winhelpDATA


functions.xml: $(gnumeric_docdir)/make-func-list.pl $(functions_xml_parts)
	(cat $(srcdir)/func-header.xml ;				\
	 $(PERL) $(gnumeric_docdir)/make-func-list.pl func.defs ;	\
	 cat $(srcdir)/func-footer.xml					\
	) >functions.tmp ;						\
	if xmllint -noent --format --encode "UTF-8" functions.tmp >functions.out ; then	\
	    mv functions.out $@; rm functions.tmp;					\
	fi

func.defs: $(top_builddir)/src/gnumeric$(EXEEXT)
	LC_ALL="$(locale)" ; export LC_ALL ; $(top_builddir)/src/gnumeric --dump-func-defs="$@"

# At some point, it may be wise to change to something like this:
# scrollkeeper_localstate_dir = @SCROLLKEEPER_STATEDIR@

omf: omf_timestamp

omf_timestamp: $(omffile)
	-for file in $(omffile); do \
	  scrollkeeper-preinstall $(docdir)/$(docname).xml $(srcdir)/$$file $$file.out; \
	done; \
	touch omf_timestamp

install-data-hook-omf:
	$(mkinstalldirs) $(DESTDIR)$(omf_dest_dir)
	for file in $(omffile); do \
		$(INSTALL_DATA) $$file.out $(DESTDIR)$(omf_dest_dir)/$$file; \
	done
	-scrollkeeper-update -p $(DESTDIR)$(scrollkeeper_localstate_dir) -o $(DESTDIR)$(omf_dest_dir)

uninstall-local-omf:
	-for file in $(srcdir)/*.omf; do \
		basefile=`basename $$file`; \
		rm -f $(DESTDIR)$(omf_dest_dir)/$$basefile; \
	done
	-rmdir $(DESTDIR)$(omf_dest_dir)
	-scrollkeeper-update -p $(DESTDIR)$(scrollkeeper_localstate_dir)

clean-local-omf:
	-for file in $(omffile); do \
		rm -f $$file.out; \
	done

all: omf

$(docname).xml: $(entities)
	-ourdir=`pwd`;  \
	cd $(srcdir);   \
	cp $(entities) $$ourdir

app-dist-hook:
	if test "$(figdir)"; then \
	  $(mkinstalldirs) $(distdir)/$(figdir); \
	  for file in $(srcdir)/$(figdir)/*.png; do \
	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	    $(INSTALL_DATA) $$file $(distdir)/$(figdir)/$$basefile; \
	  done \
	fi

install-data-local: omf
	$(mkinstalldirs) $(DESTDIR)$(docdir)
	for file in $(xml_files); do \
	  cp $(srcdir)/$$file $(DESTDIR)$(docdir); \
	done
	if test "$(figdir)"; then \
	  $(mkinstalldirs) $(DESTDIR)$(docdir)/$(figdir); \
	  for file in $(srcdir)/$(figdir)/*.png; do \
	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	    $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/$(figdir)/$$basefile; \
	  done \
	fi

install-data-hook: install-data-hook-omf

uninstall-local: uninstall-local-doc uninstall-local-omf

uninstall-local-doc:
	-if test "$(figdir)"; then \
	  for file in $(srcdir)/$(figdir)/*.png; do \
	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	    rm -f $(DESTDIR)$(docdir)/$(figdir)/$$basefile; \
	  done; \
	  rmdir $(DESTDIR)$(docdir)/$(figdir); \
	fi
	-for file in $(xml_files); do \
	  rm -f $(DESTDIR)$(docdir)/$$file; \
	done
	-rmdir $(DESTDIR)$(docdir)

clean-local: clean-local-doc clean-local-omf

# for non-srcdir builds, remove the copied entities.
clean-local-doc:
	if test $(srcdir) != .; then \
	  rm -f $(entities); \
	fi

.PHONY : html validate chm pdf
html :
	-mkdir -p html
	xsltproc -o html/gnumeric.shtml					\
	    --param db.chunk.chunk_top 0 				\
	    --param db.chunk.max_depth 3				\
	    --stringparam db.chunk.basename	"gnumeric"		\
	    --stringparam db.chunk.extension	".shtml"		\
	    --stringparam db2html.css.file	"gnumeric-doc.css"	\
	    /usr/share/xml/gnome/xslt/docbook/html/db2html.xsl		\
	    $(srcdir)/gnumeric.xml

validate :
	xmllint --valid --noout $(srcdir)/gnumeric.xml

# http://docbook.sourceforge.net/release/xsl/current/doc/html/htmlhelp.encoding.html
# http://home.kc.rr.com/rstone/ricks.htm
# http://frogleg.mvps.org/helptechnologies/htmlhelp/hhtutorials.html
# --param htmlhelp.force.map.and.alias 1
chm-stamp chm :
	-rm -rf chm output
	mkdir -p chm
	cd $(srcdir) ; ../add_dbhh.pl --out-dir=$(abs_builddir)/output --map-file=$(abs_builddir)/chm/gnumeric.hhmap
	cd chm && xsltproc -o . 	\
	    $(srcdir)/../gnumeric-docbook-2-htmlhelp.xsl\
	    ../output/gnumeric.xml
	xmllint --valid --noout --html chm/*.html
	for f in chm/*.html; do				\
	    xmllint --format --html "$$f" > chm/.$$$$;	\
	    mv chm/.$$$$ "$$f" ;			\
	done
	cp -r $(srcdir)/figures	chm
	touch chm-stamp

#gnumeric.pdf:
#	env TEXINPUTS=$(srcdir):.: dbcontext -t tex -Pfo.setup=1 -I . \
#		-P imagedata.default.scale='scale=600' \
#		-o gnumeric.tex $(srcdir)/gnumeric.xml
#	sed -i -e 's/\xE2\xA8\x89/\\times{}/' gnumeric.tex
#	env TEXMFCNF=$(srcdir): \
#		TEXINPUTS=$(srcdir):/usr/share/texmf/tex/context/dbcontext/style: \
#		texexec --pdf --mode=A4 --verbose gnumeric.tex

#gnumeric.pdf:
#	dblatex -t tex -Pfo.setup=1 -I . \
#		-P imagedata.default.scale='scale=0.6' \
#		-P latex.encoding=utf-8 \
#		-P latex.output.revhistory=0 \
#		-o gnumeric.tex $(srcdir)/gnumeric.xml
#	sed -i -e 's/\xE2\xA8\x89/\\times{}/' gnumeric.tex
#	for runs in $$(seq 1 4); do \
#		env TEXINPUTS=$(srcdir): \
#			pdflatex -interaction nonstopmode gnumeric.tex ; \
#	done

#gnumeric.hhmap: chm-stamp
#	-(cd chm && wine 'C:\Program Files\HTML Help Workshop\hhc.exe' gnumeric.hhp)
#	cp chm/gnumeric.hhmap .

#gnumeric.chm: gnumeric.hhmap
#	cp chm/gnumeric.chm .

# from gnumeric-doc.make
dist-hook: validate

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
